Toy and Doll Clothing

Toy and Doll Clothing

Toy and Doll Clothing

Testing toy and doll’s clothing is coming up a lot lately so I thought I would put it all together in one place to save me repeating and forgetting bits. This blog is written with the EN71 and the Europa guidance docs information in mind.

With many thanks to our community members www.littlearkington.com/ and www.littledollyclothesshop.co.uk/  for their wonderful toy photos!

Age classification for EN71-1 (physical tests)
The majority of handmade dolls are made as soft toys – fabric, yarn etc which generally means the doll should be suitable from birth, and the clothes shall also match that when sold with the toy, even if they are removable. This means that all the attachments such as buttons, snaps, etc all should be tested as hard parts would, with impact tests, weight tests to the higher weight to ensure they can’t come off and become a small part. Cords must also be within limits.
Doll’s clothes sold separately however could potentially be sold otherwise if they fall into a category of toys intended for over 3s, for example, fashion dolls clothes are too complex for many under 3s to handle and too fiddly, so they could be classed as for over 3s, as could clothing for other mainstream brands of small toys unsuitable for children under 3 (think sylvanian’s style).
There are a few characteristics which may class the clothing items for over 3s only:
-Clothes and shoes that are fiddly to use, using fastenings which are difficult for little hands to use, or tie with laces
-More complex play scene clothing than the average baby doll – larger fashion dolls with complex accessories for themes that would appeal to older children (think things like roller skating dolls, other sports style, vocations)

However the vast majority of dolls clothes will be suitable for any age child, and its fairly easy to test for this using our guide.

EN71-2(flammability) Testing and variation due diligence
Its a normal feeling to want to avoid burning a much as your hard work as possible and we totally understand that, as it feels like a waste of time and materials. We quite often get asked if testing a doll with clothes on or off is the correct way, and how to minimise the sacrifices! Its important to remember certain things affect flammability in different ways, even down to the direction of fabric, the starch on the fabric if unwashed, any softeners used, dangling decoration, therefore over caution should always be used instead of assumption and documenting as much as possible for cross referencing between pieces is wise.
The en71-2 states that you should test the toy as sold, with the clothes on OR if its more likely to burn faster with removable clothes off, then tested without the clothes as well – this may apply to furry bears wearing clothes for example.

When it comes to variations within clothing, its stretching the rules a bit, but testing the toy with the clothing most likely to burn (dresses usually, as they have more air circulating around them, are longer and flowiest) on the full toy. Then, testing other items of clothing (such as trousers) with the same fabric off of the toy should be enough. By testing the most likely to burn, you can say that other items made with the same fabric is less risky, as generally the clothes will burn faster when not on the toy – the stuffing tends to slow it. Remember that this is stretching the due diligence though, and only do it if you feel comfortable defending yourself if the worst should happen.  If you are in doubt, always fully test.
If you change your fabrics so that the composition is different, you may want to retest a complete doll to see how it all reacts together.
Of course if you only sell doll’s clothing alone, then you would only test the clothes separately.

If you are using the same brand of fabric, you can mix it up and use different prints of the same composition, if you want to switch brand with the same composition, a flash test would be best performed at minimum, washed and unwashed.
However if you are switching fabric composition altogether, then a full test will need performing.

EN71-3 and Annex II

Not forgetting the chemical side, all fabrics and trims will need to comply to the chemical parts of EN71-3, and Annex II (usually covered by things like reach and oekotex)
We have lots of types of fabrics in the collective membership should you wish to join us to save searching or lab testing yourself.

Hope this gives you the best dressed safe toys!

%d bloggers like this: