Due Diligence

Due Diligence

Due Diligence

So the big DD words, they are thrown around a lot as small time toy makers, sometimes rightly, sometimes as a way to stretch the rules a bit….What is due diligence and how can we apply it safely to our toys?

Anyone who has read the standards knows they aren’t so easy to follow, that testing uses a lot of odd lab equipment that we just don’t have laying about usually, and if we were to follow it all to the letter we would have to test every single bolt of fabric we use for EN71-3. Which no-one with a small business can afford. So we apply ‘due diligence’ of which the definition is: Reasonable steps taken by a person to avoid committing an offence Or The care that a reasonable person takes to avoid harm to other persons

www.childledplay.co.uk
Using a silicone baking sheet, and a steel tray, with a broom handle and dumbbell weight for the drop test – great alternatives.

It’s very difficult to define how people may or may not use DD in some cases, but here are some examples:
-when testing wooden toys instead of having a steel/silicone plate to drop toys onto, you drop it onto another hard surface such as concrete, in this case the hardness of the surface is harder than the original, so you can say that this is being diligent even though its not directly following the standards
-if the humidity of your room is less than the recommended humidity of a lab in a flammability test, the result may be that the toy is more flammable, but if it passes anyway you know it would pass at a higher humidity reading.
 -when working on variations of your toy, you might test a floppy long eared variation but cross reference to a short round ear when it came to flammability, because you know that the floppy ears will catch light easier than the round ones due to the way they will flop down.

Much of the time, the shortcuts taken may even mean that you have over tested your toy rather than under tested it. That’s a good thing. 


Due diligence may work on a sliding scale according to how your business runs, and how much money you have to invest in your business, but shouldn’t be used as a get out clause to avoid aspects of testing. Some people prefer to use a lab to test their toys entirely, some feel safe doing some parts at home and other parts done in a lab, all of these are perfectly OK (and may help To Follow our guide ;)) there is of course one aspect that can’t be done at home… 

EN71-3 (heavy metals/chemical test) is the one you collect certificates for. You can’t test for this at home and thus it does become very expensive. We use due diligence most of all for this test because it costs the most, and to follow the standards to the letter would be near impossible for a small business. Its also one of the most misunderstood tests by manufacturers who make fabric, and the one most s-t-r-e-t-c-h-e-d by toy makers due to the difficulty of getting hold of certificates, and the costs. 

What is the best and safest way of applying DD in EN71-3? 


To understand this you need to know a little chemical background when it comes to fabrics and dyes.  The majority of the printing industry uses the CMYK model for printing C=cyan M=magenta Y=yellow and K=key (black). These four colours are mixed together to create 400000 colours in the textile printing industry. As you can see by the colour chart, the CMY together produce a black when mixed, but as its not a true black, textile printers use black as a separate colour too. So we go one further and always test black to cover for this. White is the absence of colour so is essentially the base they all work from.


This is why when we test our fabrics for testing we insist on having those 4 colours to cover a fabric range. It still stretches the due diligence argument if you were reading the standards, but it’s a reasonable decision based on knowledge of fabric printing and makes sense, especially when used alongside branded or consistent fabric manufacturers.  When it comes to plain fabrics we test those four colours separated, and for printed fabrics we choose a fabric sample with the four colours in a busy print. 

 
Don’t forget as a member you can join in with testing polls and buy test results from us too!

Hopefully this helps in explaining the due diligence concept. Happy toy making!

%d bloggers like this: