Tangling cords – Ribbon sensory toys

Tangling cords – Ribbon sensory toys

Tangling cords – Ribbon sensory toys

Hello!

In this blog I’m going to be taking a look at Sensory Ribbon toys, specifically the lengths of ribbon issue. I bought this ‘ribbon sensory toy’ from a well known online shop, it arrived with no CE mark or details on packaging.

So what does the en71-1 say?
With the 2018 update to the EN71-1(Mechanical and physical tests) they added a clause about cords that can tangle defined as:

‘cord or chain with the potential to tangle:
cord or chain with an attachment, fixed loop, knot or similar feature that can cause the cord or chain to tangle and form a tangled loop or noose during reasonably foreseeable use and without excessive or intricate manipulation’

Although this seems pretty straightforward, it can get a bit difficult to decipher in the cases of some toys – especially things aimed at the youngest customers like octopus toys with their tentacles, and sensory ribbon toys. Without additional guidance and advice sometimes things can be open to interpretation to as to what constitutes ‘potential to tangle’ … please do email us if you have further received guidance on this so we can alter or add to this post.

With the ribbon toy, given that these toys are intended for babies, and with the ring could cause a loop or noose, we are going on the fact that these are classed as cords that can tangle as our interpretation, as this would be the safest route and least risk.
For Octopus tentacles, as they often curl they can get caught up and tangle easily, so again the safest route is to stick to these cords that can tangle limits.

Cord limits of toys for children under 18 months

with a combined cord length of approx. 49cms, including the toy measurement between, this would fail

When it comes to Sensory ribbon toys and octopi, As these toys are intended for babies, the standards are even stricter on the lengths of ‘cord’ (and unless its a carrying strap, basically any flexible length of fabric, ribbon, elastic, etc is classed as a cord.) The limit for a single cord is 22cm (when stretched)
For toys with multiple cords, you may find the limit frustratingly short. If the two cords ends can meet, the length of the toy in between has to also be taken into account, which leaves you with 11cms per cord minus the length of the toy between(so 22cm from end to end when stretched). This is frustrating but ensures that it can’t become tangled around a baby’s neck.

Additional tests- ribbon rings

Our guide and wooden toy add on will walk you through all the tests and paperwork to get your toy certified but this gives a general idea of what else is needed.

As sensory ribbon ring toys are intended for babies which cannot sit yet, there are a few other things which need to be taken into account. The ring itself must pass the ‘geometric shape of certain toys’ test, which means no part of it must fit through template A  to avoid being a choke hazard.
Note: the ribbons as fabric are not classed as a choke hazard (bizarrely) and therefore the shape and size test template A doesn’t apply there, only the wooden part applies.

Its easier if you buy the wooden rings ready certified to EN71-1, as this test will be done for you so you don’t need to source a template for it. There are wooden rings available online ready certified for the physical tests(en71-1) and also the chemical migration tests (
en71-3) which is vital for a mouthing toy for a baby even with sealant or finish.

Another Note: Ideally all tests would be done on a completed toy, however having the ring component tested physically would be good due diligence and you may feel it covers you for part of the physical toy testing, but you will still need to test anything that is altered by having added ribbons, and the ribbons themselves will still need testing.

Your ribbons or cords must be tested to ensure they can’t just be pulled off according to the en71-1 weight tests, and they should be below the limit of 22cm if they can be removed by those tests. Soak tests will need to be done.
Flammability testing also applies, as does chemical migration on the ribbons and every other material used(we have ribbons and threads tested in the collective for our members should you wish to join us)

Hope this helps you on your journey!

%d bloggers like this: