UKCA marking from Jan 2021

UKCA marking from Jan 2021

So as the deadlines move upon us, here’s some guidance on the changes we gathered from the government webinar, as well as the gov.uk website on UKCA.

https://www.gov.uk/guidance/placing-manufactured-goods-on-the-market-in-great-britain-from-1-january-2021 

Different marks need to be applied to toys, depending on where they are being sold from and to, and depending on whether they are self certified or fully lab tested, so be sure to read fully and double check with the links if you are selling to EU and NI especially.

Will there be toy testing changes?
As far as we are aware, regulations may have some small alterations, the name for a start, but we are not expecting any big changes to testing. Of course any changes we will report to you and update in our guidance pack free of charge for those who already have it.
You will need a new declaration of conformance (DOC) for your toy, with the new standards name, which we will send out anyone who has previously bought our guidance pack.

When it comes to apply which mark where, it can get a bit tricky, but panic not there is a transition time of a year and hopefully between this and the gov website you will figure it out 🙂

If you have sitting stock
So, for Items you already have at home to be listed, or items stocked in a shop somewhere:
– Any items made and listed for sale before 1/1/21 may still be sold with just the CE mark and don’t need the ukca – these can ‘continue to circulate’ until they reach their homes (so, if you stock a shop and have items there they can stay without alteration to the mark)
-any existing other stock can still be marketed with the CE in GB until 30th dec 2021, and circulate after that

New toys from 1/1/21

From Jan 1st 2021 things are going to be split into two groups, self certifiers (most of you) and lab tested toys.
For self certifying:
-All new toys made in GB must bear the UKCA mark from 1/1/21 where possible it must be attached to the toy as a label etc unless the size of the toy doesn’t permit it, then it may be put on packaging.
-They may also keep the CE mark Alongside the UKCA as long as the toy standards stay the same, and will need to for selling in the EU/Northern Ireland

For Lab tested toys:
Your toy must be tested in a notified lab for the area you wish to sell in – so for selling in UK it needs to be a UK notified lab and labelled UKCA, and selling in the EU it must be an EU notified lab and labelled CE.

Northern Ireland Selling and Marking – this is where it gets a bit tricky and confusing, as there will now be certain marks for NI in certain circumstances, however if you self certify just the CE should apply.

Selling FROM Northern Ireland TO GB
If you are selling from NI, you can continue to sell your toys marked with the CE
-if you self certified
-If your toys were certified in a lab with an EU notified lab
-If your toys were certified with a uk lab, that has now been transferred to an EU lab
– if your testing was carried out in a UK based lab and has both CE and the UKNI mark

Selling TO northern Ireland from GB
Any toys being sold to northern Ireland will continue to need the CE mark. UKCA is not applicable.

Lab tested toys:
If you are selling toys certified by a lab which is UK notified, you will need to use the UKNI mark and the CE mark together.
If you are selling toys from an EU notified lab you will just need the CE mark.

More info:  https://www.gov.uk/guidance/using-the-ukni-marking-from-1-january-2021 

Selling to the EU
You will still need the CE mark to market your toys to the EU.
If you lab certified your toys from a UK notified lab – note that you can’t sell to the EU with the UKNI mark alongside the CE mark. (so you need separate labelling for the EU and NI)
You can use the CE mark and the UKCA label attached.

 

Hope this helps a bit!

%d bloggers like this: