
Aisforalice CE marked crown
This blog was brought to you with help and pictures from Ruth from AisforAlice
There can be a lot of debate around crowns as to whether they are/are not classed as toys, whether they can be classed as photo props or should be classed as fancy dress (or disguise toys as they are called in the standards) and it can be pretty confusing.
As a general rule, costumes for age under one, do not need the CE mark as development-wise a child cannot play with fancy dress as an older child might, but anything over age one may be used as a fancy dress item and should be classed as such.
Photo Props?
I think this lands in a pretty grey area and I would advise seeking some additional support from your trading standards. Perhaps if you shop is solely dedicated to selling photo props to professional photographers and your marketing pictures also reflect this, and there is no chance they could be bought by a parent for play you might have an argument there, but consider your own motives here, its about safety and small children safety so you may as well triple check and ensure your crowns conform regardless.
Birthday Crowns?

Thanks to my sister for this image 🙂
It seems pretty bonkers that you can buy ‘party hats’ or wear a paper crown from a cracker without having to go through the stress of the CE test. But as soon as the crown becomes reusable, the ‘novelty’ aspect of it disappears and it basically becomes a toy in the eyes of the standards.
The standards even say a phrase like: ‘Item could become ignited without the child’s knowledge, for example when blowing candles on a birthday cake’ which basically spells it out why we go to the trouble of CE marking crowns and why it applies to birthday crowns.
The risks in crowns
When you come to do your risk assessment of your crowns, one of the bigger risks is that they commonly form a ring/loop (standards call it ‘fixed loop’) of fabric and/or elastic which becomes a strangulation hazard, essentially it can and will end up around a child’s neck at some point, so it needs to be made safe. As the fabric length will be longer than it is wide, it becomes classed as a cord and has to follow those rules.
Fixed loops in the standards have a limit of 38cms, which for perspective is about the size of a one month old’s head. Following that means its not possible to have a fixed crown shape as it would need to be bigger than the 38cms. The only way to increase that circumference safely is with a breakaway point.
A breakaway point is where there is a break in the crown somewhere which means if the crown was caught or pulled at, it would snap apart. A breakaway point should also be fixable so that if it breaks, it doesn’t ruin the item in general, and a breakaway points allows the circumference of a ‘fixed loop’ (crown) to be larger than 38cms.
Options…
Your main option is most likely to be Hook and loop (velcro).
Snaps may be a possibility if they pass the breakaway test of opening in less than 25N of force, but also remember they will also need tension tests to be sure they aren’t removable too.
Why not ties? Due to the latest updates to en71-1 using ties brings in extra complications of falling into other cord categories such as cords that can form a tangled loop etc, which is even more limiting when it comes to measurements.
Other tests
Crowns of course fall into all the same tests as toys do, any additional parts that are not appliqued flat will need weight tension testing, eg sewn or glued parts. Possible choke testing should parts come loose. Appliqued parts can be checked with a credit-style card to be sure it cannot be lifted. All of this bit is covered in our guide and your risk assessment with that will point out any other parts which may need testing for your particular crown.
All materials of course need testing to en71-3. Many felt suppliers can supply certificates for felt, so we haven’t got it tested in the community(check free resources page), however we do have plains and printed cottons, elastic, and hook and loop certificates either on pre order or ready to purchase for our members, as well as additional support from the standards if needs be too!
Flammability for Disguise toys
Flammability for disguise toys is a little different to general toys – due to the way the it is being worn, rather than being carried, and cannot likely easily be dropped. It generally needs a special rig and this can be made yourself to test it on. When it comes to these toys the materials can be tested in some respects rather than the completed toy, which in one way is great as you don’t have to completely sacrifice a toy to the burning, but on the other hand the rig is additional work on your first go anyway, so its no win 😉
Depending on where the item is worn(as in body part!), and also the pile of the fabric, change the regulations of flammability, for example a long pile fur fabric has a much much smaller allowable burn rate than a standard fabric, due to how it will catch light. Head wear in disguise toys has very strict criteria – it basically must not burn due to birthday candles etc. So you must choose self extinguishing fabrics like felt.
It also has stricter criteria with flowing elements( anything flowing down or sticking out)
For crowns, any elastic or attaching materials does not need flammability testing. but you know, flash testing won’t hurt for good toy making safety and due diligence.
For more information members can access our flammability wiki on headwear with a run down on how they are tested.
This blog was written with all my best intentions and research from the EN71-1 and 2(updated to 2021 flammability), but remember it is down to you to ensure that your toy conforms to the standards.
Hopefully this brings it all clearer and you are on your way to the next step of being a CEmarked toy maker 🙂
